Shed Master Roller Door Opener

Shed Master Roller Door Opener

The B&D Shed Master automatic garage door opener is driven by a strong and reliable DC motor. With added security features, it represents value for money and quality for all shed and carport situations and is designed to suit external applications such as perimeter doors and carports.

Click Here to Download Brochure

Features and Benefits

  • Suitable for most rolling garage doors up to 2.7m high garage doors.
  • Housing can resist exposure to water making this product suitable to be used in carport situations.
  • 3 channel transmitter – 3,468,000,000 codes for the ultimate in security.
  • Control panel disbling enables the buttons on the opener to become inoperable and thus not a security risk.
  • Available as an optional extra, for added security, the manual release cord can be locked, making it impossible for intruders to simply reach out, disengage the motor and gain access to your carport.
  • In-built automatic safety reverse system, stops then reverses when the door comes in contact with an object. When the garage door is closed, the motor ensures the door is positively locked, with no need for you to remember to lock the door.
  • Automatic reset after a power failure.
  • Motor rated to 200N.
  • 433.92MHz frequency – for improved reception and less interference.
  • Electronics can be easily removed whilst the opener is still mounted to the door.
  • The receiver in the opener has storage for 8 memory codes and can store up to 6 remote control transmitter codes, one DIP switch remote control transmitter code and one entry keypad code.
  • Patented door sensing to adjust the force to open and close.
  • Patented door positioning system always knows where the door is positioned for safety and security.

Door Type

  • Suits standard residential single or double width rolling garage doors, such as the B&D Roll-A-Door, up to 2.7m high and 5.5m wide.*
  • Not suitable for high cycling doors.
  • *Or 15m/sq door surface area with a maximum lifting load of 20kg and travel time not exceeding 25 seconds – door must be in good working condition.

Method of operation

Activate the operator by either the door control button, combo access device or keyless entry system, the remote control transmitter or manually open the door, by pulling the release handle down and back toward the operator.

Accessories

  • Additional remote control transmitters (2, 3 and 4 channel hand and keyring transmitters).
  • Combo access device – allows doors to be manually operated during a powder failure, using a key to remove the barrel with a cord attached to the disengagement handle.
  • Entry keypad – allows entry to the garage without a remote control transmitter, via the use of a 4 digit PIN number.
  • Safety infra-red beam – for added safety and security the door will automatically stop and reverse if the beam is broken. B&D recommend the use of infra-red beams.
  • Transmitter wall button – allows remote operation within 10 metres. Can be mounted inside the home or garage.

Specifications

  • Voltage: 240V AC 50Hz only

Click Here to Download Brochure

Call (07) 5524 1505 | Request a Quote | Request for Service | FAQs